IF YOU REACHED THIS PAGE VIA A SEARCH ENGINE THIS WILL TAKE YOU TO OUR HOME PAGE

This kit includes some of the pieces needed to modify a Mauser Bolt as shown here. 

I have for sale the 1/4-inch Grade 8 bolt and two styles of plastic knobs.

These are the Mauser items. Shown are: two 1/4-inch Grade 8 bolts a little longer than 8-inches; a round ball 1-inch in diameter with 1/4-inch threaded brass insert; a pear shaped knob with a 1/4 threaded brass insert; and an unmodified Mauser bolt. The bolts are cadmium flashed, with a little sandpaper they shine right up.

This is the Mauser Ball Kit. One ball and one bolt for $7 delivered. THIS INCLUDES SHIPPING

This is the Mauser Pear Kit. One ball and one bolt for $8 delivered. THIS INCLUDES SHIPPING

You will need:

A propane torch, some low-temp silver solder and flux, a drill motor (drill press is better), some cutting oil, file and/or grinding wheel, a hacksaw, a center punch and hammer. THESE ARE NOT IN THE KIT !!!!

Wagner Home Page